Information of lamp harp
Lamp harp, an important part of a table lamp or floor lamp. It has the adjustable size and fixed size two models. The main material is metal.
Adjustable size usually have 7-9 inches,7-10 inches,8-10 inches this sizes. The 8-10 inches adjustable size lamp harp is the hot sell size.The shape is square and the usually sell color is nickel,brass,ORB.
Fixed-size lamp harp usually sell 6 inch,7 inch,8 inch,9 inch,10 inch and so on.The 8 inch lamp harp is hot sell size.The shape are oval and square.The hot sell color is nickel,brass,bronze.
Balance and stability,the fixed size lamp harp is better than adjustable size lamp harp. But purchase adjustable size lamp harp can let you experience different size,that mean you purchase 1pc adjustable size lamp harp,you can have a test for 3 or 4 different size.
Add an adjustable size lamp harp
Adjustable size lamp harp usually collocation with an inner diameter 35mm iron ring as an adjustable size lamp harp kit.Also Some people will add an inner diameter 40mm iron ring with a plastic snap ring.Iron ring balance and stability is better than the conventionally configured lamp harp base.
Before add an adjustable size lamp harp,you need take down the lamp finials.Then confirm the size,open the size locks on both sides, adjust to the corresponding size, and then lock the locks.
Check the lamp harp base is completely consistent with the lateral grooves on both sides.Then you need fix the lock covers on both sides to the bottom of the lamp harp and the joints on both sides to ensure that the base is firm.
Check and confirm lamp harp is balanced,then put the lamp harp on the lamp.
Please check the lamp harp again,make sure that the lamp harp is firm. When all other parts are installed,you can install the lamp finials at last.
If you use iron ring as the lamp harp base,the steps are the same.Just need put the plastic snap ring into the iron ring with an inner diameter of 40mm.
Add a fixed size lamp harp
Add a fixed size lamp harp to lamp is easier than add a fixed size lamp harp.
Before add a fixed size lamp harp,you just need take down the lamp finials.
Then you need confirm the lamp harp is stable.
You also need Check the lamp harp base is completely consistent with the lateral grooves on both sides.Then you need fix the lock covers on both sides to the bottom of the lamp harp and the joints on both sides to ensure that the base is firm.
Now you can put the lamp harp on the lamp.Like add an adjustable lamp harp on lamp,you must check the lamp harp again,and make sure that the lamp harp is firm. When all other accessories are installed,you can install the lamp finials at last.
No matter it is oval or square, the installation method is the same, but it is necessary to ensure that the lamp harp is stable.
Add lamp harp on lamp is not very difficult, just confirm the lamp harp is stable and all accessories are firm.Also need check the lamp harp size and you can add lamp harp quickly.If not,you will replace the other size lamp harp.You may add more time and money cost.It’s not very good for you.
If you have any demand of lamp harp, you can send me your idea and we can have a talking in future.
Learn more about QINGCHANG products
People also ask
Post time: Sep-26-2021